CSM_PhotoMicro_OP_E_8_1 Accessories (Order Separately) Ordering Information Connectors and Connector Hold-down Clips Applicable Sensor models EE-SX67@ (A, P, R), EE-SX47@, EE-SY67@, EE-SPY31@/41@, EE-SPX303N/403N, EE-SPW311/411 Type Cable length Model Remarks EE-1001 Connector EE-1001-1 L terminal and positive (+) terminal are already short-circuited. EE-1009 *1 EE-1006 1M 1m EE-1010 1M *1 EE-1006 2M 4 conductors Connector with Cable EE-1006D 3 conductors 2m EE-1006L 2 conductors EE-1010 2M *1 1m EE-1010-R 1M *1 Connector with Robot Cable 2m EE-1010-R 1M*1 NPN/PNP Conversion 0.46 m EE-2002 Connector (total length) Connector Hold-down Clip EE-1006A For EE-1006, EE-SX670@, 470, EE-SY671, and 672 only. Case (housing) EE-1006H 100 per carton Dispersion Pins EE-1006C 500 per carton Connector Parts *2 Appearance Special Crimping Tool Switching knob EE-1006T Crimping section Ratchet Handle *1. EE-1009- or EE-1010-series Connectors have a builtin locking mechanism to prevent cable disconnection when only the cable is pulled. To remove the Connector from the Sensor, grip the top and bottom of the Connector firmly and push into the Sensor once before pulling out. The locking mechanism prevents the Connector from being removed by pulling on the cable only and enables removal only when the Connector (housing) is pulled. *2. The case (housing) and dispersion pins (for hand-crimping) for EE-1006 Connectors can be ordered separately. Use the EE-1006T Special Crimping Tool to prepare the Connector. Applicable Sensor models EE-SX97@-C1, EE-SX97@P-C1 Item Cable length 1m Connector with Cable 3m 1m Connector with Robot Cable 3m Model EE-1017 1M EE-1017 3M EE-1017-R 1M EE-1017-R 3M Sensor Remarks Applicable Sensor models EE-SX91@@-C1J-R (Pre-wired Connector) Item Cable length Model Connector with Cable 2m EE-1016-R Remarks The robot cable is standard for all models. Applicable Sensor models EE-SX67@@-C1J-R (Pre-wired Connector) Item Cable length Model Connector with Cable 2m EE-1016-R-1 Remarks The robot cable is standard for all models. Applicable Sensor models EE-SPX74@/84@ Item Connector with Cable Cable length 1m EE-1013 Model Applicable Sensor models EE-SPX301/401, EE-SPY30@/40@, EE-SPZ301@/401@ Item Cable length Model Connector EE-1002 Connector with Cable 1 m EE-1003 NPN/PNP Conversion 0.46 m EE-2001 Connector (total length) Connector Hold-down Clip EE-1003A Connector Remarks Remarks For EE-1003 only. 1 Ratings and Specifications Product Model Connector *1 EE-1009 Connector with Connector with Cable *1 Robot Cable *1 EE-1010 Connector (short-circuitConnector with ed between Cable positive (+) and L terminals) *2 EE-1001-1 EE-1006 Connector EE-1010-R EE-1001 Appearance Item Contact resistance 20 m max. (at 20 mV max., 100 mA max.) Insertion/removal durability *3 Insertion strength Surplus strength (housing holding strength) Standard cable length Lock strength *3 Ambient humidity Housing Material Contact Applicable Photomicrosensors 15 m max. (at 100 VDC max.) 50 times min. --- No. of poles 6 N max. 50 N max. No. of poles 0.4 N max. --- 20 N max. --1 m, 2 m --1 m, 2 m No. of poles 29 N min. ---10 to +60C -10 to +75C -10 to 60C Polybutylene phthalate (PBT) Phosphor bronze (solder plating) EE-SX67@ (A,P,R) (Connector Models only), EE-SX47@, EE-SY67@, EE-SPY31@/41@, EE-SPX303N/403N, EE-SPW311/411 *1. The Connector has a built-in locking mechanism. To remove the Connector from the Sensor, grip the top and bottom of the Connector housing, as shown in the following diagram, and then pull out the Connector. *2. EE-SX67@ and EE-SY67@ are the best used in the light-ON state. *3. The insertion/removal durability and lock strength apply only to the lock mechanism. They do not apply to the EE-1001, EE-1001-1, and EE-1006, which do not have lock mechanisms. Product Model 10 m max. (100 VDC max.) Connector Connector with Cable Connector with Cable Connector with Cable EE-1002 EE-1003 EE-1013 EE-1017 Connector with Robot Cable EE-1017-R Sensor Connector Connector with Robot Cable EE-1016-R EE-1016-R-1 Appearance Item 1.5 N min. 15 N min. Cable length Ambient humidity Housing Material Contact 10 m max. 20 m max. (at minute current (at 10 mADC of 1 kHz and 500 VDC) and 1 ADC) 20 N max. 23.5 N max. 40 N max. 15 N min. (initial) 3.5 N min. 10 N min. 10 N min. (ten times) --1m -10 to +75C -10 to +60C -10 to +55C Nylon Phosphor bronze (solder plating) 1 m, 3 m -10 to +60C 2m -25 to +85C Applicable Photomicrosensors EE-SPX301/401, EE-SPY30@/ EE-SPX74@/ 40@, EE-SPZ301@/401@ 84@ EE-SX97@C1, EE-SX97@P-C1 EE-SX91@-C1J-R (Pre-wired Connector) Contact resistance Insertion strength Surplus strength (housing holding strength) 25 m max. (at 10 mA DC and 20 mV max.) 20 N max. EE-SX67@-C1J-R (Pre-wired Connector) 2 (Unit: mm) Tolerance class IT16 applies to dimensions in this datasheet unless otherwise specified. Photomicrosensor Connectors and Connector Hold-down Clips Dimensions Connector EE-1001 13 2.540.15 4 0.6 10.8 6 2.91 Connector (short-circuited between positive (+) and L terminals) 13 EE-1001-1 4 0.6 5 1.4 2.5 10.8 30.3 6 0.8 2.80.1 1.5 3.90.4 2.54 5.50.4 7.62 Connector with Cable EE-1006 2M (EE-1006 1M) Connector Hold-down Clip EE-1006A 11.8 2.54 (Can be used only with EE-1006 Connectors for the Photomicrosensors listed below.) 5.3 0.6 (4)(3)(2)(1) 16.2 R3 25.2 19 20 12 3.2 3.6 4-R1.6 3.4 2,000 (1,000) Cable: 4-dia. 4-conductor vinyl-insulated round cable (Conductor cross section: 0.2 mm2, Insulator diameter: 1.1 mm). 5.5 3 3 2.1 10.2 21.9 19.4 Terminal Arrangement 15 1.2 40 (1) (2) (3) (4) L OUT Brown Pink Black Blue (R1) Material: Stainless steel Applicable Photomicrosensors EE-SX67@ (A,P,R) (Connector Models only), EE-SX47@, EE-SY67@, EE-SPY31@/41@, EE-SPX303N/403N, EE-SPW311/411 2 For EE-SX670@, 470@, EE-SY671, and 672 only. 3 Photomicrosensor Connectors Connectors EE-1009 13 2-C1 4 5 0.6 1.4 2.5 9 4.5 0.8 1.2 2.5 2.54 1.5 7.62 Connector with Cable EE-1010 2M (EE-1010 1M) Connector with Robot Cable EE-1010-R 2M (EE-1010-R 1M) 13.5 2-C1 13 7.62 (1) (2) (3) (4) 2.54 0.6 4 205 2,000 (1,000) 155 255 5 1.4 2.5 EE-1010 cable EE-1010-R cable: 4-dia. 4-conductor vinyl-insulated round cable (Conductor cross section: 0.2 mm2, Insulator diameter: 1.1 mm). Terminal Arrangement (1) (2) (3) (4) L OUT Brown Pink Black Blue Applicable EE-SX67@ (A,P,R) (Connector Models only), EE-SX47@, EE-SY67@, EE-SPY31@/41@ Photomicrosensors EE-SPX303N/403N, EE-SPW311/411 4 Photomicrosensor Connectors and Connector Hold-down Clips Connector EE-1002 Connector with Cable EE-1003 0.75 2.5 16.62 6 3 6 Connector Hold-down Clips (For EE-1003 only) EE-1003A 11 5 1.75 4.9 20 5.7 10.7 4.2 14.2 1 22 Two, 3.2 dia. hole 1 25.5 3.5 2.9 1 8 16.5 11 1 OUT 2 6 5.5 1,00020 31 1.2 0.6 0.25 2.5 2 5 1.2 (3) (2) (1) Blue Black Brown 5 2.5 11.5 4 Cable: 1.61-dia. 1-conductor vinyl-insulated round cable (Conductor cross section: 0.33 mm2). 13.5 Applicable Photomicrosensors 1.25 1.8 EE-SPX301/401, EE-SPY30@/40@, EE-SPZ301@/401@ Connector with Cable EE-1013 5.7 2.9-dia. 3-conductor vinyl-insulated round cable (Conductor cross section: 0.15 mm2, Insulator diameter: 0.9 mm), Standard length: 1 m. XHP-3 (JST Mfg.) (3) 2.5 9.8 (2) Terminal Arrangement (1) 7.75 Applicable Photomicrosensors 20 1,000 162 71 (1) (2) (3) Blue GND(0V) Black OUTPUT Brown Vcc EE-SPX74@/84@ Connector with Cable EE-1017 Connector with Robot Cable EE-1017-R 5.8 2 10 8 205 (4) (3) (2) (1) Connector with Robot Cable: EE-1017-R Robot instrumentation cord: 4 dia., 4 cores, (Cross section area of conductor: 0.2 mm2/ insulator: 1.1 mm dia.) Applicable Photomicrosensors +50 0 1,000 255 Connector with Cable: EE-1017 Vinyl insulated round cord: 4 dia., 4 cores, (Cross section area of conductor: 0.2 mm2/ insulator: 1.1 mm dia.) (8) 155 Terminal Arrangement (1) (2) (3) (4) 1 2 Brown Black White Blue EE-SX97@-C1, EE-SX97@P-C1 5 Connector with Robot Cable EE-1016-R 10 8 5.8 2,000 16 Terminal Arrangement 7 (1) (2) (3) (4) 4 3 10 2 2 1 2 2.8-dia. 4-conductors robot cable (Conductor cross section: 0.15 mm , Insulation diameter: 0.8 mm), Standard length: 2 m. Applicable Photomicrosensors OUT2 OUT1 Brown White Blue Black EE-SX91@-C1J-R (Models with Junction Connectors) Connector with Cable (Connection with Robot Cable) EE-1016-R-1 2,000 10 8 5.8 16 Terminal Arrangement 4 (1) (2) (3) (4) 3 10 2 2 1 2.8-dia. 4-conductors robot cable 2 (conductor cross-section: 0.15 mm , insulator diameter: 0.8 mm), Standard length: 2 m. Applicable Photomicrosensors L OUT Brown Pink Blue Black EE-SX67@-C1J-R EE-SX67@P-C1J-R NPN to PNP Transistor Output Conversion Connectors NPN/PNP Conversion Connector EE-2001 NPN/PNP Conversion Connector EE-2002 * Terminal Arrangement Terminal Arrangement (1) (2) (3) OUT Brown Black Blue (1) (2) (3) OUT Brown Black Blue *The EE-SX67@ and EESY67@ do not support LightON mode. 8 10.7 20 200 40 16.2 200 8 dia. 12 12.5 Connector side (sensor side) 4.9 20 200 40 200 8 dia. 12 11.8 5.3 Connector side (sensor side) Cable: 4-dia, 3-conductors vinyl-insulated round cable (Conductor cross section: 0.2 mm2, Insulation diameter: 1.2 mm). Cable: 4-dia, 3-conductors vinyl-insulated round cable (Conductor cross section: 0.2 mm2, Insulation diameter: 1.2 mm). Cable end (end with power output) Cable end (end with power output) Applicable EE-SPX301/401, EE-SPY30@/40@, Photomicrosensors EE-SPZ301@/401@ EE-SX67@ (A,P,R) (Connector Models only), EE-SX47@, EE-SY67@, EE-SPY31@/41@, EE-SPX303N/403N, EE-SPW311/411 6 Read and Understand This Catalog Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or comments. Warranty and Limitations of Liability WARRANTY OMRON's exclusive warranty is that the products are free from defects in materials and workmanship for a period of one year (or other period if specified) from date of sale by OMRON. OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, REGARDING NON-INFRINGEMENT, MERCHANTABILITY, OR FITNESS FOR PARTICULAR PURPOSE OF THE PRODUCTS. ANY BUYER OR USER ACKNOWLEDGES THAT THE BUYER OR USER ALONE HAS DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. OMRON DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED. LIMITATIONS OF LIABILITY OMRON SHALL NOT BE RESPONSIBLE FOR SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED ON CONTRACT, WARRANTY, NEGLIGENCE, OR STRICT LIABILITY. In no event shall the responsibility of OMRON for any act exceed the individual price of the product on which liability is asserted. IN NO EVENT SHALL OMRON BE RESPONSIBLE FOR WARRANTY, REPAIR, OR OTHER CLAIMS REGARDING THE PRODUCTS UNLESS OMRON'S ANALYSIS CONFIRMS THAT THE PRODUCTS WERE PROPERLY HANDLED, STORED, INSTALLED, AND MAINTAINED AND NOT SUBJECT TO CONTAMINATION, ABUSE, MISUSE, OR INAPPROPRIATE MODIFICATION OR REPAIR. Application Considerations SUITABILITY FOR USE OMRON shall not be responsible for conformity with any standards, codes, or regulations that apply to the combination of products in the customer's application or use of the products. At the customer's request, OMRON will provide applicable third party certification documents identifying ratings and limitations of use that apply to the products. This information by itself is not sufficient for a complete determination of the suitability of the products in combination with the end product, machine, system, or other application or use. The following are some examples of applications for which particular attention must be given. This is not intended to be an exhaustive list of all possible uses of the products, nor is it intended to imply that the uses listed may be suitable for the products: Outdoor use, uses involving potential chemical contamination or electrical interference, or conditions or uses not described in this catalog. Nuclear energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles, safety equipment, and installations subject to separate industry or government regulations. Systems, machines, and equipment that could present a risk to life or property. Please know and observe all prohibitions of use applicable to the products. NEVER USE THE PRODUCTS FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCTS ARE PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM. PROGRAMMABLE PRODUCTS OMRON shall not be responsible for the user's programming of a programmable product, or any consequence thereof. Disclaimers CHANGE IN SPECIFICATIONS Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our practice to change model numbers when published ratings or features are changed, or when significant construction changes are made. However, some specifications of the products may be changed without any notice. When in doubt, special model numbers may be assigned to fix or establish key specifications for your application on your request. Please consult with your OMRON representative at any time to confirm actual specifications of purchased products. DIMENSIONS AND WEIGHTS Dimensions and weights are nominal and are not to be used for manufacturing purposes, even when tolerances are shown. PERFORMANCE DATA Performance data given in this catalog is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of OMRON's test conditions, and the users must correlate it to actual application requirements. Actual performance is subject to the OMRON Warranty and Limitations of Liability. ERRORS AND OMISSIONS The information in this document has been carefully checked and is believed to be accurate; however, no responsibility is assumed for clerical, typographical, or proofreading errors, or omissions. 2011.12 In the interest of product improvement, specifications are subject to change without notice. OMRON Corporation Industrial Automation Company http://www.ia.omron.com/ (c)Copyright OMRON Corporation 2011 All Right Reserved. Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Omron: EE-1006 3M EE-1006H EE-1006T EE-1010-R 2M